The Experiment menu contains options that control the collection and storing of data.
| Start Collection | Starts data collection. |
| Store Latest Run | Saves the most recently collected data in memory allowing you to collect another data set without losing the first. |
| Clear Latest Run | Deletes the data from the most recently collected data run. |
| Keep | Stores one data point at a time in the Events with Entry and Selected Events data-collection modes. |
| Extend Collection | Increases the length of the data-collection period by 50%. |
| Connect Interface | Confirm or change the interfaces detected by Logger Pro. |
| Remove Interface | Remove any or all interfaces from Logger Pro. |
| Set Up Sensors | Manually set up Logger Pro for a particular sensor. |
| Add Offline Interface | Allows you to design experiments and save files even when you don't have the interfaces or sensors plugged in. |
| Data Collection | Modifiy data collection settings for your experiment, including data-collection mode and sampling rate. |
| Remote | Prepares device for data collection away from the computer. |
| Change Units | Change the units of measurement for sensors such as a Motion Detector or a Temperature Probe. |
| Calibrate | Calibrate the sensor(s) connected to the interface or computer. |
| Zero | Resets the reported value of an sensor (such as a Force Probe) to zero without otherwise changing the calibration. |
| Live Readouts | Select Live Readoutsto display the unit and current reading at the top of the screen. |